BEECHCRAFT8aron68
Serial TH
773
and
After
INTRODUCTION
Section
VIII
Handling,
Serv
-
Maint
The purpose of this section is to outline the requirements for
maintaining the airplane in a condition equal to that of its
original
manufacture.
This
information
sets the time
frequency intervals at which the airplane should be taken to
a BEECHCRAFT Aero or Aviation Center or International
I
Distributor or Dealer for periodic servicing or preventive
maintenance.
The Federal
Aviation
Regulations place the responsibility
for the maintenance of
this
airplane
on the
owner
and
operator of the airplane
who
must
ensure
that
all
maintenance is done by
qualified
mechanics
in
conformity
with
all
airworthi
ness
requirements
established for
this
airplane.
All limits, procedures, safety practices,
time
limits,
servicing and
maintenance
requirements
contained in
this
handbook are considered mandatory.
Authorized BEECHCRAFT Aero or Aviation Centers
orl
International
Distributors
or
Dealers
can
provide
recommended
modification,
service,
and
oper
ati
n9
procedures issued by both the FAA and Beech Aircraft
Corporation, which are designed to get maximum utility and
safety from the airplane.
If there is a question concerning
the
care of
the
airplane, it is
important to include the airplane serial
number
in any
correspondence. The serial
number
appears on the model
designation placard attached to the
right
side of
the
fuselage at the inboard end of the flap.
September, 1979
8-5
To Next Page
Loading...
