Beechcraft Baron 58 - Propellers; Starters - Time for Cranking

Section II
Limitations
PROPELLERS
BEECHCRAFT Baron 58
Serial TH 773 and After
HARTZELL
2 Blade Hubs: BHC-J2YF-2CUF
Blades: FC8475-6
Spinner: C-2285-6P
Pitch Setting at
30 inch Station: Low 14.5°; Feathered
80.0°
Diameter: 78 inches maximum, 76 inches minimum
3 Blade Hubs: PHC-J3YF-2UF
Blades: FC7663-2R
Spinner: C-3567-1 P
Pitch Setting at
30 inch Station: Low 13.0°; Feathered
82.0°
Diameter: 76 inches maximum, 74 inches minimum
McCAULEY (TH-773 thru TH-1089)
2 Blade Hubs: D2AF34C30
Blades: 78FF-0
Spinner:
D-3953 or D-4046
Pitch Setting at 30 inch Station: Low 15.0°; Feathered
79.0°
Diameter: 78 inches maximum, 76 inches
minimum
3 Blade Hubs: D3AF32C35
Blades: 82NB-6
Spinner: PD-4068 or PD-4069
Pitch Setting at 30 inch Station: Low
14.0°±,.2°;Feathered
181.2
0
± .3
0
Diameter: 76 inches, no cut-off permitted
STARTERS - TIME FOR CRANKING
Do not operate starter continuously for more
than 30 sec-
onds.
Allow starter to cool again before cranking.
2-6
August, 1984