Beechcraft Baron 58 - Interior

BEECHCRAFT Baron 58
SerialTH 773 and After
ENGINE
Section VIII
Handling, Serv - Maint
Clean the engine with neutral solvent. Spray or brush the
fluid over the engine, then wash off with water and allowto
dry. Solutions which may attack rubber or plastics should
not be used.
INTERIOR
To remove dust and loose dirt from the upholstery, head-
liner, and carpet, clean the
interior regularly with a vacuum
cleaner.
Blot up any spilled
liquid promptly wth cleansing tissue or
rags. Do not pat the spot; press the
blotting material firmly
and hold it for several seconds. Continue blotting until no
more liquid is taken up. Scrape off sticky
materials with a
dull knife;
then spot-clean the area.
Oily spots may be cleaned
with household spot removers,
used sparingly. Before using any solvent, read the
instruc-
tions on the container and test it on an obscure place on the
fabric to be clea ned. Neversaturate the fabric with a volatile
solvent; it may damage
the padding and backing materials.
Soiled upholstery and carpet
may be cleaned with foam-
type detergent used according to the manufacturer's in-
structions. To
minimize wetting the fabric, keep the foam as
dryas possible and remove it with a vacuum cleaner.
The plastic trim,
instrument panel, and control knobs need
only be wiped
with a damp cloth. Oil and grease on the
control
wheel and control knobs can be removed with a
cloth moistened
with isopropyl alcohol. Volatile solvent,
such as mentioned in
the article on care of plastic windows
should never be used since they often craze the plastic.
October 1976
8-27