16 Bend-Tech Dragon
Gate Troubleshooting
02
Troubleshooting Guide
02
Gate Troubleshooting
2.1 Dragon Gate Troubleshooting
2.1.1 Eccentric bearing on the Gate is sticking
Bearings are Dirty
Clean the bearings with compressed air, brake cleaner, or glass cleaner.
2.1.2 Gate is Binding
Bearings or Bearing Rotation Plate/Gate Ring Gear are Dirty
Clean the Gate using glass cleaner, brake cleaner, or compressed air.
Eccentric Bearing needs Adjustment
Remove the Gate and adjust the eccentric bearing on the Bearing Rotation Plate/Gate Ring
Gear. See Section 2.2 for the full procedure.
C-Axis Backlash needs Adjustment
Check the C-Axis for backlash. If play is observed, see Section 2.3.
2.1.3 Gate is Loose
Eccentric Bearing needs Adjustment
Remove the Gate and adjust the eccentric bearing on the Bearing Rotation Plate/Gate Ring
Gear. See Section 2.2 for the full procedure.
To Next Page
Loading...
