17Bend-Tech Dragon
Gate Troubleshooting
02
Troubleshooting Guide
2.1.4 Gate is not Operating Smoothly
Gate is Dirty
Clean the Gate with compressed air, glass cleaner, or brake cleaner. If the Gate is extremely
dirty use a rag or toothbrush to help clean it.
Eccentric Bearing needs Adjustment
Remove the Gate and adjust eccentric bearing on the Bearing Rotation Plate/Gate Ring Gear.
See Section 2.2 for the full procedure.
2.1.5 Play in the Gate
Eccentric Bearing needs Adjustment
Remove the Gate and adjust eccentric bearing on the Bearing Rotation Plate/Gate Ring Gear.
See Section 2.2 for the full procedure.
2.1.6 Gate Jaws are not Operating Smoothly
Lead Screws are Dirty
Clean Gate Lead Screws, with brake cleaner, glass cleaner, or compressed air. Re-lubricate.
Gate Jaw Rack & Pinion are Dirty
Clean Gate Jaw Rack with brake cleaner, glass cleaner, or compressed air.
Important
Customers with older machines who are having this issue should contact
Bend-Tech regarding updating the Gate Lead Screws.
To Next Page
Loading...
Need help?
General
