Bend-Tech Dragon mAchines User Manual

32 Bend-Tech Dragon
Troubleshooting Guide
Material Support Lift Troubleshooting
05
05
Material Support Lift
Troubleshooting
5.1 Material Support Lift Troubleshooting
The Material Support Lift on the Dragon A400 is a pneumatic actuator driven system. Ensure
󰀩
5.1.1 Material Support Lift is Colliding with the Rail
Material Support Lift has fallen out of Adjustment
Calibrate the Material Support Lift.
Material Support Lift is not Calibrated Correctly
Calibrate the Material Support Lift.
5.1.2 Material Support Lift is Not Homing
Material Support Lift has fallen out of Adjustment
Calibrate the Material Support Lift.
5.1.3 Material Support Lift is Pausing at the Wrong Time
Material Support Lift is not Calibrated Correctly
Calibrate the Material Support Lift.
5.1.4 Material Support Lift is too High
Material Support Lift Can is out of Adjustment
Contact Bend-Tech Support.

Bend-Tech Dragon mAchines Specifications

General

Brand	Bend-Tech
Model	Dragon mAchines
Category	Industrial Equipment
Language	English