54 Bend-Tech Dragon
Troubleshooting Guide
ESS Connections
10
9.3 Ethernet Connections
Ensure there is a direct connection between the Ethernet port on the Control Box and the
Computer.
Note
It is OK to use a USB to ethernet adapter and connect an ethernet cable from the USB port
to the router to gain internet access for computers without Wi capabilities. This will leave the
other ethernet port open for use with the Dragon machine.
Y
A B
Z
X
Y C X
-
B A+ A-
EStop
Engraver Torch
Laser
Gate EStop EStop
Z
+ Z-
L
E
Router
WiFi*
PC Tower
(Back)
Control Box
*Computers provided by Bend-Tech
have a built in WiFi adapter. However, if
WiFi is not available the computer will
need to be connected to the internet
with a USB to Ethernet adapter.
To Next Page
Loading...
