EasyManuals Logo

Benelli 502C User Manual

Benelli 502C
Go to English
559 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
5 - 3
Operation and important riding points
EN
5
Engine break-in
There is never a more important period
in the life of your engine than the period
between 0 and 1600 km. For this reason,
you should read the following material
carefully.
Since the engine is brand new, do not put
an excessive load on it for the rst 1600
km. The various parts in the engine wear
and polish themselves to the correct ope-
rating clearances.
During this period, prolonged full-throttle
operation or any condition that might re-
sult in engine overheating must be avoi-
ded.
0–1000 km
Avoid prolonged operation above 6.000
r/min.
NOTICE
After 1000 km of operation, the engine
oil must be changed and the oil lter
cartridge or element replaced.
1000–1600 km
Avoid prolonged operation above 7.000
r/min.
1600 km and more
The vehicle can now be operated normal-
ly.
NOTICE
Keep the engine speed out of the
tachometer high-rpm zone.
If any engine trouble should occur
during the engine break-in pe-
riod, immediately have a Benelli
dealer check the vehicle.
Parking
When parking, stop the engine, and then
remove the key from the main switch.
WARNING
Since the engine and exhaust sy-
stem can become very hot, park in
a place where pedestrians or chil-
dren are not likely to touch them
and be burned.
Do not park on a slope or on soft
ground, otherwise the vehicle
may overturn, increasing the risk
of a fuel leak and re.
Do not park near grass or other
ammable materials which might
catch re.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benelli 502C and is the answer not in the manual?

Benelli 502C Specifications

General IconGeneral
Displacement500 cc
Transmission6-speed
Fuel Tank Capacity21 liters
Rear BrakeSingle disc
Seat Height750 mm
Curb Weight217 kg
Engine TypeLiquid-cooled, 4-stroke, 2-cylinder
Max Power47.6 hp @ 8, 500 rpm
Max Torque45 Nm @ 6, 000 rpm
Front SuspensionUpside-down forks
Front BrakeDouble Discs
Wheelbase1600 mm
Fuel SystemEFI
Rear SuspensionSwingarm with monoshock

Related product manuals