Benelli 502C User Manual

8 - 1
Specications
EN
8
Dimensions
Overall length:
2240 mm
Overall width:
950 mm
Overall height:
1150 mm
Wheelbase:
1580 mm
Seat height:
770 mm
Weight
Curb weight:
220 kg
Engine
Combustion cycle:
4-stroke
Cooling system:
liquid cooled
Valve train:
DOHC
Cylinder arrangement:
Vertically
Number of cylinders:
2 cylinders
Displacement:
500 cm3
Bore x stroke:
ø69 x 66.8mm
Compression ratio:
11.5:1
Starting system:
Electric starter
Lubrication system:
Forced wet sump
Reccomended Engine oil:
Standard JASO T903: MA
SAE viscosity grades:
10W50
API classication:
SJ or higher
Engine oil quantity
Oil change:
2.9 L
With oil lter removal:
3.0 L
Air lter
Air lter element:
Paper ltering element
Fuel
Recommended fuel:
Unleaded petrol (gasohol - containing
Ethanol up to 10% by volume (E10)
Fuel tank capacity:
21.5 L ± 0.5L
Fuel reserve amount:
3 L
Certication:
EURO 5
Fuel consumption:
4,2 l/100 km
CO² emissions:
97 g/km
Spark plug(s)
Manufacturer/model:
NGK CR8E
Spark plug gap:
0.7–0.8 mm
Clutch
Clutch type:
Wet
Transmission
Final drive:
Chain
Transmission type:
Constant mesh 6-speed
Chassis
Frame type:
Trellis pipes with steel plates

Benelli 502C Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	21 liters
Rear Brake	Single disc
Seat Height	750 mm
Curb Weight	217 kg
Engine Type	Liquid-cooled, 4-stroke, 2-cylinder
Max Power	47.6 hp @ 8, 500 rpm
Max Torque	45 Nm @ 6, 000 rpm
Front Suspension	Upside-down forks
Front Brake	Double Discs
Wheelbase	1600 mm
Fuel System	EFI
Rear Suspension	Swingarm with monoshock