Benelli 502C User Manual

6 - 4
Periodic maintenance and adjustment
EN
6
C heck/ Replacement
C heck the chain tension.
C heck that the rear
wheel is correctly aligned.
C lean and lubricate.
C heck/ / Lubricate/ Replace
C heck/ / Lubricate/ Replace
9
Replacement
Replacement
E ach time the timing chain is replaced
E ach time the timing chain is replaced
Replace every time the chain is replaced
C heck the conditions, clean and restore the distance between electrodes
E very 5 0 0 km and after every wash or if the motorcycle has been used in the rain.
Timing C hain
Sliding
1 0
Timing C hain
Tensioner
C heck/ Reset Level/
Replacement
C heck that the fuel pipes are not
are cracked or damaged
I f necessary, replace


1 1 Spark plug

1 2
Drive
C hain

1 3 Ring Gear

1 4 P inion

1 5
C ircuit Fuel
P ipes

1 6 Brake fluid

Replace every time the chain is replaced
I n any case, replace every 4 years
I n any case, replace every 2 years
R
I
I II II I
I
I II II I
I II II I
I II II I
I II II I
1°
2° 3° 4° 5°
1
7 13 19 25
0.6
0
0
4.4 8.0 11.5 15.5
km x 1.000
mi x 1.000
0
0
No.
Maintenance
intervention or control
Frequency
Pre
delivery
Annual
inspection
Part

Benelli 502C Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	21 liters
Rear Brake	Single disc
Seat Height	750 mm
Curb Weight	217 kg
Engine Type	Liquid-cooled, 4-stroke, 2-cylinder
Max Power	47.6 hp @ 8, 500 rpm
Max Torque	45 Nm @ 6, 000 rpm
Front Suspension	Upside-down forks
Front Brake	Double Discs
Wheelbase	1600 mm
Fuel System	EFI
Rear Suspension	Swingarm with monoshock