23
Connecting COMPONENT-video devices
Be sure to match the corresponding colors between the cables and the terminals. The COMPUTER
2 and COMPONENT and be used for connection to video output devices.
AV equipment: DVD player,
digital tuner, etc.
Component cable
OR
• If you have already made a Component Video connection between the projector and the video source device, you
need not connect to this device again using a composite Video connection as this makes an unnecessary second
connection of poorer picture quality.
• If the selected video image is not displayed after the projector is turned on and the correct video source has been
selected, please check that the video source device is turned on and operating correctly. Also check that the signal
cables have been connected correctly.
To Next Page
Loading...
