BenQ PX9510 - Using On-Screen Display; Using the Menus; Navigating the OSD

English
34
Using On-Screen Display
Using the menus
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change
various settings.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to navigate and make
changes to the OSD. The following illustration shows the corresponding buttons on the remote
control and on the projector.
1. To open the OSD, press the
Menu
button on the OSD control panel or remote control. There
are ve folders on the menu. Press the cursor
◄
or
►
buttons to move through secondary
menus.
2. Press
▲
or
▼
to select menu items and
◄
or
►
to change values for settings. Press
ENTER
to conrm the new setting.
3. Press
CANCEL/RETURN
to leave a submenu or
MENU
to close menu.