31
Adjusting the projected image
Adjusting the image position
The projected image position and size can be adjusted manually from the control panel or the
remote control unit. Refer to the following guides to adjust picture position manually.
1. Press the
LENS SHIFT
key on the remote control to bring up the Lens Shift window or press
direction key to ship the projected image directly.
2. If the lens shift is operated via remote control, use
ENTER
button to switch Lens shift and
Zoom/Focus, arrow buttons to adjust Lens shift setting.
Fine-tuning the image size and clarity
1. Press the
ZOOM +
or
ZOOM-
button on the control panel or the remote control to adjust the
projected imaged as you desired.
2. Sharpen the picture by pressing
FOCUS+
or
FOCUS-
button on the control panel or the
remote control.
To Next Page
