EasyManua.ls Logo

BenQ PX9510 - Cleaning the Filters

BenQ PX9510
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
56
Storing Unused Color Wheel: Keep the unused color wheel in the zipper bag in which the 6-segment
color wheel (not supplied) was packaged. This bag prevents dust from falling or collecting on the
color wheel.
Cleaning the lters
The projector uses three lters to keep the fans free of dust and other particles, and should be
cleaned every 500 hours of operation. In dusty environments, it is recommended to clean the lters
more frequently. If the lter is dirty or clogged, your projector may overheat. When the message
be-low is displayed, the lters must be cleaned.
When the “
Please clean lter”
message is displayed, please clean all three lters at the same time to synchronize the
lter time display. The
Filter Message
item should be enabled in the
Options
menu.
Refer to the following guide to clean the lters:
1. The left-side and rear lters can be cleaned as demonstrated in the following images.
Only clean the outside of the exhaust vents with a vacuum cleaner.
2. The bottom exhaust vent can be accessed as shown.
!

Table of Contents

Other manuals for BenQ PX9510

Related product manuals