70
Control the projector through a web browser
Open a web browser and enter the projector's IP address. Its home page with four options will
display:
Projector Status
: Current projector settings.
Alert Mail Setup
: Settings for projector abnormality email reminders. In case of any abnormality
the projector sends emails to preset users.
Crestron
: Crestron compatible network browser control page.
PJLink
: This page lets you set up a security password for PJLink connection.
Projector status
The following illustrates a projector with IP address "192.168.0.100":
System
Model Name
: Model number of the projector
Software Version
: Version of projector system software
System Status
: Current projector power on status
Display Source
: Current input signal
Lamp 1 Hours
: Use hours of lamp 1
Lamp 2 Hours
: Use hours of lamp 2
Error Status
: Display projector error messages
Network control setup information (RJ-45 Version)
Lan Version
: Version of network control software
IP address
: Current IP address
Subnet mask
: Current subnet setting
Default gateway
: Current gateway setting
DNS server
: Current DNS server setting
MAC address
: Preset MAC address
To Next Page
Loading...
