135
Parking the embroidery module
⦁
remove embroidery hoop
►
the embroidery arm travels horizontally to the left to
the park position
⦁
change to the sewing mode
Sewing is possible even with the embroidery module
attached.
Check hoop and motif size
►
the embroidery hoop moves vertically (in
longitudinal direction) to read the attached
embroidery hoop
►
the size of the motif is read and traveled by the 4
arrow icons
⦁
press «Back» icon 2x
►
the «Edit»-display appears
►
the attached embroidery hoop is shown in the
display as well as in the icon «Embroidery hoop
Selection»
►
an error message appears when no embroidery
hoop has been attached or the attached embroidery
hoop is too small
Virtual Positioning
Icon is inactive = if the motif is repositioned, the hoop
does not move.
⦁
touch the button
If the motif is repositioned, the hoop simultaneously
moves along with it to the new position.
This function is only visible when an embroidery hoop
is attached.
To Next Page
Loading...
