Functions - Display
Overview Sewing functions
Needle stop up/down
⦁
touch icon
►
the arrow on the Display points down
►
the sewing computer stops with needle down
⦁
touch the icon again
►
the arrow on the Display points up
►
the sewing computer stops with needle up
Securing
⦁
touch icon before sewing
►
the single stitch is secured with four securing
stitches at the beginning
⦁
touch icon while sewing a single pattern
►
the single stitch is secured at the end
►
the sewing computer stops
⦁
to program the securing function within a stitch
combination
⦁
any single stitch of the combination can be secured
at the begin or at the end
Pattern repeat
⦁
touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of a single stitch or a stitch combination
⦁
touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops
after the selected repeats of single stitches or a
stitch combination
Functions
1 Needle stop up/down
2 Securing
3 Pattern repeat
4 Needle position
5 Mirror Image left/right
6 Security program
7 Mirror image up/down
8 Presser foot indicator
9 Permanent reverse sewing
10 Balance
11 Presser foot pressure
⦁
touch «i»-icon
⦁
function Display appears
Information
⦁
touch icon
►
another Display is opened
Back
⦁
touch icon
►
goes back to the previous Display
►
all changes are saved
Confirm selection
⦁
touch icon
►
activates or confirms alteration/selection
Leaving the active Display
⦁
touch icon
►
the Display is closed
►
goes back to the previous Display
General functions
Needle stop position up and «Quick Reverse»-
button
If the «Quick Reverse»-button is pressed while sewing
or after stopping (e.g. zig-zag) with programmed needle
stop up, the sewing computer sews one stitch forward
before it switches to sewing in reverse.
Needle stop position down and «Quick
Reverse»-button
If the «Quick Reverse»-button is pressed after stopping
(e.g. zig-zag) with programmed needle stop down, the
sewing computer switches to sewing in reverse
immediately.
2
4
3
5 6
7 8
10 119
1
To Next Page
