Functions
Overview «Function»-buttons sewing computer
«Quick reverse»-button
secures the seam beginning and end: sews in
reverse as long as the button is pressed
used to program the buttonhole length
used to program the darning length
used to determine end of stitching in straight
stitch Securing stitch No. 5
used for securing in Quilters securing program
No. 1324
«Start/Stop»-button
starts and stops the sewing computer when
operating it with or without foot control
starts and stops the BSR-Function if the BSR
foot is attached and activated
«Pattern end»-button
⦁
press button while sewing
►
the sewing computer stops at the end of the
active single pattern or the active pattern in a
pattern combination
Speed control
sewing-/embroidery speed is infinitely variable
with the slide
«Needle stop»-button
⦁
touch button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
«Pattern begin»-button
⦁
press the button
►
the active stitch pattern or program is set to
pattern begin
To Next Page
Loading...
