Balance
Balances forward and reverse stitches.
Presser foot pressure
The presser foot pressure is set via the adjustment
wheel on the left side of the headframe.
►
the respective value is visible in the icon
Security program
⦁
touch icon
⦁
touch «Needle»- or «Stitch plate»-icon
Overview Needles:
⦁
touch the desired «Needle»-icon
►
stitch width is limited automatically
►
this prevents the inserted special needle from
hitting the presser foot and the stitch plate = no
needle breakage
►
numbers in the needle icons indicate the needle
distance in mm
⦁
touch «Standard needle»-icon
►
the Standard needle is activated again
►
the stitch width limitation is deactivated
Overview Stitch plates:
⦁
touch the desired «Stitch plate»-icon
►
stitch width is limited automatically
►
this prevents the inserted needle from hitting
the presser foot and the stitch plate = no needle
breakage
The function remains active even when the sewing
computer is turned off and on.
Mirror image up/down
The sewing computer sews the stitch pattern mirrored
up/down referring to the sewing direction.
Presser foot indicator
⦁
touch icon
►
shows the recommended presser foot
►
the active Display shows the optional presser feet
for the selected stitch
⦁
touch the «Back»-icon
►
the Display is closed
Permanent reverse sewing
The sewing computer sews permanently in reverse.
To Next Page
