►
embroidery menu is opened
►
the motif is ready for embroidering
⦁
press the «Start/Stop»-button on the headframe, until the embroidery
computer starts
►
the embroidery computer sews approximately 7 stitches and stops
automatically
►
a Display indicates that the thread tail has to be cut at the beginning of the
motif
⦁
raise the presser foot
⦁
cut the thread tail at the beginning of motif
⦁
lower the presser foot
⦁
press the «Start/Stop»-button on the headframe and continue embroidering
Interrupting the process
⦁
press «Start/Stop»-button on the headframe
►
the embroidery computer stops
Completing the color
⦁
press «Start/Stop»-button on the headframe
►
the embroidery computer embroiders all the sections in the color activated
►
the embroidery computer stops automatically when complete
►
both threads are automatically cut
Changing color
►
the embroidery computer switches automatically to the next color
⦁
change color of the upper thread accordingly
⦁
embroider with the new color
Embroidery menu
Embroidering using the «Start/Stop»-button on the headframe
«Embroidery»-display
►
after starting the motif the «Embroidery»-display appears
To Next Page
