Automatic darning
Reverse pattern foot No. 1
Buttonhole foot No. 3A
Simple darning program No. 22
Quick darning of holes or worn areas
Replaces threads along the lengthwise grain in all materials.
Preparation
⦁
hoop light weight materials in the darning hoop (optional accessory)
►
the darning area stays evenly taut and cannot be distorted
Darning with reverse pattern foot No. 1
⦁
insert the needle in the top left of the worn area
⦁
sew first row
⦁
stop sewing computer
⦁
press «Quick reverse»-button
►
the length is programmed
⦁
finish sewing the darning program
►
the sewing computer stops automatically
⦁
press the «clr»-button
►
the program is cleared
Darning with the buttonhole foot No. 3A
for darning worn and damaged areas
darning length max. 3 cm
same procedure as with Reverse pattern foot No. 1
Reinforcement
Use fine material or (adhesive) interlining as a backing.
If the darning becomes distorted
Correct with the Balance function (more about Balance-Function see
page 60).
To Next Page
Loading...
