1
⦁
turn the handwheel (see page 15)
►
needle is raised
⦁
raise presser foot lever 1 up
►
presser foot is lifted
Slide-on table
The slide-on table increases sewing surface.
Attaching the slide-on table
⦁
raise the needle and presser foot
⦁
slide over free-arm to the right until it engages
Removing the slide-on table
⦁
raise the needle and presser foot
⦁
press button 2 down
⦁
pull slide-on table to the left
Seam Guide
⦁
press the release button and insert into the groove (underside of table) from
left or right
Can be moved over the entire table length.
Presser foot lifter
Raising or lowering presser foot via Presser foot lifter.
Attaching the Presser foot lifter
⦁
insert into the opening
Raising and lowering the presser foot
⦁
with your knee push lever to the right
You should be able to operate the Presser foot lifter with your knee in your
normal sitting position.
►
the presser foot is raised; the feed dog is lowered simultaneously. The
thread tension is released.
The feed dog is raised as soon as the first stitch is sewn.
Your dealer can adjust the Presser foot lifter if necessary.
2
To Next Page
Loading...
