Berthold Duo Xpert - Measurement; Measurement: Parameter; Measurement: Table

LB 470 Level 7 Main Menu Device Setup
56925BA2 Rev. 03, 11/2017
125
7.3.4 93BMeasurement
Device settings | Setup | Measurement
The submenu ″Measurement″ is used for an overview of the measurement param-
eters and calibration settings used.
Measurement: Parameter
The parameters used for the current measurement are displayed in the ″Parame-
ters″ tab.
1
2
3
4
Background count rate [cps]
Characteristic curve (standard or inverted)
Nuclide (Cs-137 or Co-60)
Half-life [years]
Fig.
105 Measurement (Parameters)
Measurement: Table
The measurement points used for the current measurement are displayed in the
″Table″ tab.
1
2
3
4
PV measurement point in percent [%]
Count rate [cps]
Date of last change of the measurement parameter set
Number of measuring points
Fig.
106 Measurement (Table)