Berthold Duo Xpert - Detector settings: High Voltage | Detector Type; Detector settings: High voltage | HV Settings

LB 470 Level 7 Main Menu Device Setup
56925BA2 Rev. 03, 11/2017
93
Detector settings: High Voltage | Detector Type
Device settings | Setup | Sensors | [NAME DETECTOR] | High Voltage | Detector Type
Internal device parameters are adjusted to suit the size of the used scintillator by
setting the detector code. The correct detector code is already set at the factory
and a change is not normally required.
IMPORTANT
A table with the detector code to be used is in the operating manual of the de-
tector.
1
2
Input field Detector code
Description of the scintillator type
Fig.
71 Detector Code: Setting the scintillator type
Detector settings: High voltage | HV Settings
Device settings | Setup | Sensors | [NAME DETECTOR] | High Voltage | HV Settings
1
2
3
4
5
6
Selection High voltage mode "Auto" / "Manual"
Input field Manual high voltage
Input field HV Default (starting value of the high voltage regulation)
Display setting value high voltage
Display actual value high voltage
Display average high voltage
Fig. 72 Submenu "Settings"