147
Maintenance
Maintenance
1. Keep it dry. Precipitation, humidity and liquid that contains minerals will corrode electronic
circuits.
2. Do not use or store it in dusty, dirty areas. Its moving parts can be damaged.
3. Do not store it in hot areas. High temperatures can shorten the life of electronic devices,
damage batteries, and warp or melt certain plastics.
4. Do not store it in cold areas. When the device warms up, moisture can form inside it, which
may damage electronic circuit boards.
5. Do not attempt to separate the device. Non-expert handling of the device may damage it.
6. Do not drop, knock or shake it. Rough handling can break internal circuit boards.
7. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it.
8. Do not paint it. Paint can clog the device ‘s moving parts and prevent proper operation.
Do not operate the devicer under the temperature 0 or over 40 degrees. Excessive hot
or cold environment will make the device unworkable, disorder, or even damage it. To avoid the
situation happened, please do not use the device for two hours when you take it out of the hot or
cold environment, because the humidity or moisture formed by the change of temperature kept in
the device will damage it.
To Next Page
Loading...
