BestCode NExT 88SHS - Page 105

BestCode Next Series 8 Technical Manual October 2022 Page 91 of 290
6. Remove the Solvent Filter and
discard in accordance with local
regulations.
7. Install new Solvent Filter.
Dampener Printhead Assembly (31-0054-01) Replacement
Be familiar with proper safety information for handling fluids.
Procedure Time: 15
minutes
1. Remove the Ink & Makeup SmartFill cup Instructions here
2. Remove the Main Ink Filter from the
Filter Housing
3. Remove the SmartFilter Housing by
removed the 2 M4 screws from the
SmartFilter bracket
4. Locate the Dampener Printhead
Assembly (31-0054-01)