BestCode NExT 88SHS - Page 173

BestCode Next Series 8 Technical Manual October 2022 Page 159 of 290
Prompt Code
Prompt Name
Prompt Description
01-0019
Log Reset
Reset SmartFill Log. Are you sure?
Solution 1:
Press OK to Erase the SmartFill Log.
Solution 2:
Press Cancel to close the prompt.
Prompt Code
Prompt Name
Prompt Description
01-001A
NO PROMPT OCCURS
Reset SmartFill Log.
Written to the event log to indicate that SmartFill Log was in fact reset.
Prompt Code
Prompt Name
Prompt Description
01-001B
Log Reset
Reset SmartFilter Log. Are you sure?
Solution 1:
Press OK to Erase the SmartFilter Log.
Solution 2:
Press Cancel to close the prompt.
Prompt Code
Prompt Name
Prompt Description
01-001C
NO PROMPT OCCURS
SmartFilter Log Reset
Written to the event log to indicate that SmartFilter Log was in fact reset.
Prompt Code
Prompt Name
Prompt Description
01-001D
Message Exists
Replace Message?
Displayed to inform the user that the message named already exists, and asking to confirm that it
should be replaced.
Solution 1:
Press OK to overwrite the existing message with the same name.
Solution 2:
Press Cancel to return to Message Name screen.
Prompt Code
Prompt Name
Prompt Description
01-0021
NO PROMPT OCCURS
"Touch screen calibrated."
Written to the event log to indicate that the touch screen was successfully calibrated.
Prompt Code
Prompt Name
Prompt Description
01-0024
NO PROMPT OCCURS
"Printer Ready"
Sent to a remote user to indicate that the printer is ready. Also saved to Remote Log.
Prompt Code
Prompt Name
Prompt Description
01-0025
NO PROMPT OCCURS
"Printer Not Ready"
Sent to a remote user to indicate that the printer is not ready. Also saved to Remote Log.
Prompt Code
Prompt Name
Prompt Description
01-0027
Log Reset
Reset RFID Log. Are you sure?
Solution 1:
Press OK to Erase the RFID Log.
Prompt Code
Prompt Name
Prompt Description
01-0027
NO PROMPT OCCURS
Reset RFID Log.
Written to the event log to indicate that RFID Log was in fact reset.