BestCode NExT 88SHS - Page 180

BestCode Next Series 8 Technical Manual October 2022 Page 166 of 290
Prompt Code
Prompt Name
Prompt Description
04-8009
Charge
"Print file checksum invalid: %ls"
Indicates that the specified file does not have a valid checksum.
Solution 1:
Scan external device to ensure USB is not corrupted. Perform “Erase and Reformat Memory.”
Prompt Code
Prompt Name
Prompt Description
04-800A
Charge
"Error reading print file: %ls"
Indicates an error attempting to read the file.
Solution 1:
Power down and restart the printer.
Solution 2:
Scan external device to ensure USB is not corrupted. Perform “Erase and Reformat Memory.”
Prompt Code
Prompt Name
Prompt Description
04-800B
Charge
"Print file has wrong version: %ls"
Indicates that the charge file does not have an appropriate version.
Solution 1:
USB data is bad. Get new file data and perform “Erase and Reformat Memory.”
Prompt Code
Prompt Name
Prompt Description
04-800C
Charge
"Print memory could not be verified: %ls"
Indicates that the charge file was read into memory, but verification failed.
Solution 1:
Power down and restart the printer.
Solution 2:
Erase and Reformat Memory
Prompt Code
Prompt Name
Prompt Description
04-800D
Charge
"Internal file system errors: 0x%x"
Indicates that the internal file system (NOR) has errors.
Solution 1:
Erase and Reformat Memory
Solution 2:
Reload firmware using a new download file from the Distributor Portal
Prompt Code
Prompt Name
Prompt Description
04-800E
Charge
"Script version is invalid: %ls"
Solution 1:
Erase and Reformat Memory
Solution 2:
Reload firmware using a new download file from the Distributor Portal
Prompt Code
Prompt Name
Prompt Description
05-0001
USB
"No errors detected."
Indicates that the USB contains valid files.
Prompt Code
Prompt Name
Prompt Description
05-0002
USB
-
Indicates that scanning the USB file system detected one or more errors.
Solution 1:
Reformat USB or Try a new USB stick.
Prompt Code
Prompt Name
Prompt Description
05-0003
USB
"Loading older software versions not permitted."
Indicates that the version of software on the USB drive is less that the one currently installed.
Solution 1:
Load a valid version of Software onto the USB stick.