BestCode NExT 88SHS - Page 53

BestCode Next Series 8 Technical Manual October 2022 Page 39 of 290
Date / Time
Time Delimiter
Changes the character used to separate time codes from eachother.
Change from HH:MM:SS to HH/MM/SS or any other delimiting character.
Date Delimiter
Changes the character used to separate date codes from eachother.
Change from YYYY/MMDD to YYYY.MM.DD or any other delimiting character.
Shift Codes
Video Guide for Shift Codes: https://youtu.be/tQP9Z1Vem5g?t=547
Shift
Selects the shift to be modified.
1-24
Shifts
Sets the number of unique shifts to
track per day
2-24
Start
Sets the time of day that this shift
begins.
0:00 – 23:00
Code
This is the code that will be printed
as long inside the selected Shift.
Programmable Value
Change to the next shift and set a new time. This will end the settings of the previous shift, and allow
creating settings for the shift at the new time of day.
Day 60/366
Switch
Off
On
Leap Year day (Feb 29) is set to day 60, and
all subsequent days are shifted +1, with
December 31 being 366.
Leap Year day (Feb 29) is set to day 366, with all days
remaining in non-leap year order, with December being
365.