Beta RR250 - Engine Removal from Vehicle

1
6
1
2
ENGINE REMOVAL FROM VEHICLE
• Carefully wash the vehicle;
• Remove the engine guard plate;
• Place the vehicle on an adequate stand.
1 ENGINE REMOVAL FROM VEHICLE
To dismantle the tank from the vehicle it is
necessary to remove the seat, disconnect the tank
ventilation pipe, position the fuel valve on OFF
and disconnect the fuel pipe from the valve.
ATTENTION!
Perform the operation with the engine cold and
in a well-ventilated area.
ATTENTION!
Fire hazard! Fuel is easily flammable.
Do not carry out the operation near
open flames or lit cigarettes and
always turn off the engine.
Wipe off any traces of spilled fuel
immediately.
Remove the screw 1 fastening the tank to the
frame, and the screws 2 (one per side) fastening
the side panel to the radiator.