3
88
A
2
3
ENGINE CHECKS AND ASSEMBLY
Pour about 7cc of gear oil (for specifications refer
to the recommended lubricants and liquids table)
in area A.
Insert Bendix coupling 2 in bush with collar 3
present on the outer side left crankcase half.
3.11
IGNITION SYSTEM
Before reassembling the ignition system, it is rec-
ommended to make sure it is in good working
order.
The ignition system consists of the magnetic
pick-up unit, the stator unit and the flywheel. The
system is completed by the ignition coil and the
spark plug, which are not dealt with here.
Application of oil.
Insertion of Bendix coupling.
To Next Page
Loading...
