If you're not getting a picture on your Beyonwiz DVD Player, try these steps:
* Ensure the product is in Operating Mode.
* Check that the AV cables are securely connected to the TV.
* Verify the antenna cable is correctly connected to the product.
* Adjust the brightness level on your TV.
* Confirm the channel is currently broadcasting.
* Set the TV to the correct input (e.g., AV1, Component, HDMI) that matches your product's video output connections.
* Check that a Service Scan has been performed.
* Configure the product’s video output settings to suit your display resolution using the TV-OUT button on the remote or via the Setup menu (Setup\Configuration\A/V Output).
S
Sonya PriceAug 19, 2025
Why is there no sound from my Beyonwiz DVD Player?
C
Caleb ThompsonAug 19, 2025
If you're experiencing no sound or poor sound quality with your Beyonwiz DVD Player, consider the following checks:
* Verify the volume levels on the product, TV, and any other audio devices.
* Ensure that the mute function is not enabled on the product, TV, or other audio devices.
* Confirm that the audio output connections on the product are correctly connected to the appropriate input connectors on your TV or other audio devices.
* Check the product’s audio output settings in the Setup menu (Setup\Configuration\A/V Output) to ensure they are correctly configured.