Big Backyard F23073C - Attach Ground Stake to Fort

 58  support@solowavedesign.com
1 x Ground Stake 1-1/4 x 1-1/2 x 14”
HardwareWood Parts
2 x #8 x 2-1/2” Wood Screw
S3
WARNING: To prevent tipping and avoid potential
injury, stakes must be driven 10-1/2” into ground. Digging or
driving stakes can be dangerous if you do not check rst for
underground wiring, cables or gas lines.
A:Drive1(0318)GroundStake10-1/2”intothegroundatAccessLadderRockwallandattachto(2157)Ground
SWSide,into(2100)AccessRailRightwith2(S3)#8x2-1/2”WoodScrews.(g.23.1and23.2)
0318
0318
Step 23: Attach Ground Stake to Fort
10-1/2”IntoGround
S3
Fig. 23.2
2157
Fig. 23.1
2100
2157