Big Backyard F23073C - Attach Swing Ground Stakes

 66  support@solowavedesign.com
HardwareWood Parts
Step 29: Attach Swing Ground Stakes
A:Drive1(0318)GroundStake10-1/2”intothegroundateach(1863)SWPostandattachwith2(S3)#8x
2-1/2”WoodScrewspergroundstake.(g.29.1and29.2)
WARNING: To prevent tipping and avoid potential injury, stakes must
be driven 10-1/2” into ground. Digging or driving stakes can be dangerous
if you do not check rst for underground wiring, cables or gas lines.
10-1/2”IntoGround
4 x #8 x 2-1/2” Wood Screw
2 x Ground Stake 1-1/4 x 1-1/2 x 14”
0318
S3
1863
Fig. 29.1
Fig. 29.2
0318
S3
1863