Binder KB - Page 66

KB / KB-UL (E4 + E6) 10/2021 page 66/147
Fixed value
08.03.2015 05:05:06
Entry menu “Start time”.
The current time plus 30 seconds is shown. For a
postponed start, enter the desired start time with the
operating button.
Press the “Ok” button to confirm.
..\ Start time (HH:MM:SS)
0
5:05:36
0
Ins Pos1 End 1 2 3 4 5 6 7 8 9
Close Ok Home
Week program
08.03.2015 05:05:06
Initial view.
The week program is running.
Program0004
Setpoint
Actual value
Temperature [°C]
15.0
15.3
Section: 0002 End: Sunday 00:00:00
Fan [%]
100.0
User Quick menu Menu
This symbol on the controller display indicates that a week program is running.
During a running week program, it is impossible to edit, rename or delete this program (when selecting
such a function, a corresponding message is displayed). The other program functions are available.
During a running week program, no time program can be started.
To start a week program, you can also go to Quick menu > Week program > Start
Fixed value
08.03.2015 05:05:06
“Quick menu”.
Select “Week program”
and press the operating button
..\ Quick menu
Measurement chart
Active Alarms
Temperature setpoint
Fan speed setpoint
Safety controller setpoint
Time program
Week program
Close Home