Handheld monitor user’s manual
16
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
<5% U
T
(>95% dip in U
T
)
for 5 sec
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
<5% U
T
(>95% dip in U
T
)
for 5 sec
Power frequency
(50/60Hz)
magnetic field
IEC61000-4-8
Power frequency
magnetic fields Should
be at levels characteristic
of a typical location in a
typical commercial or
hospital environment.
NOTE U
T
is the a.c. mains voltage prior to application of the test level.
Guidance and manufacturer’s declaration – electromagnetic immunity –
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacturer’s declaration – electromagnetic immunity
The M800 HANDHELD MONITOR is intended for use in the electromagnetic environment
specified below. The customer or the user of M800 HANDHELD MONITOR should assure
that it is used in such an environment.