biosystems PhD Lite - Appendix B Phd Lite Sensor Ranges

63
Appendix B PhD Lite sensor ranges
Part No. Description Range Resolution
54-25-80 LEL Combustible gas 0 – 100% LEL 1% LEL
54-25-90 O
2
Oxygen 0 – 30%/Vol. 0.1%
54-25-01 CO Carbon monoxide 0 – 1000 PPM 1 PPM
54-25-05
CO+ CO Plus dual purpose CO / H
2
S
Provides a non-specific readout for CO and H
2
S
CO: 0 – 1000 PPM
H
2
S: 0 – 200 PPM
1 PPM
54-25-19 CO-H CO Minus, reduced sensitivity to H
2
0 – 1000 PPM 1 PPM
54-25-02 H
2
S Hydrogen sulfide 0 – 200 PPM 1 PPM
54-25-14
Duo-Tox Dual channel CO/H
2
S
Provides substance specific readouts for CO and H
2
S
CO: 0 – 1000 PPM
H
2
S: 0 – 200 PPM
1 PPM
1 PPM
54-25-03 SO
2
Sulfur dioxide 0 – 25 PPM 0.1 PPM
54-25-04
†
NH
3
Ammonia (For software versions prior to 2.0) 0 – 50 PPM 1 PPM
54-25-21
†
NH
3
Ammonia 0 – 100 PPM 1 PPM
54-25-08
† ‡
Cl
2
Chlorine (non-specific) 0 – 50 PPM 0.1 PPM
54-25-18
† ‡
Cl
2
Chlorine (specific) 0 – 50 PPM 0.1 PPM
54-25-12
† ‡
ClO
2
Chlorine dioxide (non-specific) 0 – 15 PPM 0.1 PPM
54-25-20
† ‡
ClO
2
Chlorine dioxide (specific) 0 – 5 PPM 0.01 PPM
54-25-06 NO Nitric oxide 0 – 350 PPM 1 PPM
54-25-09
†
NO
2
Nitrogen dioxide 0 – 50 PPM 0.1 PPM
54-25-10
†
HCN Hydrogen cyanide 0 – 100 PPM 0.2 PPM
54-25-13 PH
3
Phosphine 0 – 20 PPM 0.1 PPM
†
Special reactive gas calibration adapter (54-26-0405) required for proper calibration.
‡
The non-specific Cl
2
and ClO
2
sensors can be used for the detection of both gases. The specific Cl
2
and ClO
2
sensors are designed for the
target gas only.