What to do if Bizerba Scales show 'Operator is not a cashier!'?
If your Bizerba Scales show 'Operator is not a cashier!', and the SC II is operated with the setting 'Configuration' / 'Cash desk' / 'Amount tend./change op.' set to YES, check the settings for the applicable operator in the 'Data maintenance' / 'Operator data' menu.
What to do if Bizerba SC II 100 Scales say 'Please press key'?
If your Bizerba Scales display 'Please press key' when self-service mode is activated, press the button.
What does 'No customer number' mean on Bizerba Scales?
If your Bizerba Scales display 'No customer number' during sales during overlapping service with customer/operator link, the operator used does not have a link to a customer no.
What does 'Customer no. is already used by Operator: XXX' mean on Bizerba SC II 100?
If your Bizerba Scales display 'Customer no. is already used by Operator: XXX' during sales during overlapping service with customer/operator link, the customer no. is occupied by another operator. Undo the customer/operator link.
What does 'Seasonal PLU locked' mean on Bizerba SC II 100 Scales?
If your Bizerba Scales display 'Seasonal PLU locked' when a PLU is opened, switch off the menu item 'PLU locked' in the menu 'PLU maintenance' / 'Other'.
What does 'Not in tare range' mean on Bizerba SC II 100 Scales?
If your Bizerba Scales show 'Not in tare range' during sales, it means the scales were in an underload range when attempting to tare. To fix this, unload the scales, reset them, and then retry the taring process.
Why is the weight value display not at zero on Bizerba SC II 100?
If your Bizerba Scales display a weight value that is not at zero or appears modified, it could be due to a few reasons: the load plate may not be correctly positioned, there might be objects on the load plate, or there could be soiling on or beneath the load plate. To fix this: * Clean the load plate. * Position it correctly. * Remove any objects. Also, ensure the scale is leveled properly.
What to do if Bizerba SC II 100 say 'Please log on cashier'?
If your Bizerba Scales show 'Please log on cashier', it means no cashier is logged in within the cash register mode. To resolve this, log on a cashier using the 'Operator log on/off' key. Also, verify the 'Cashier' setting is active for the operator in 'Data maintenance' / 'Operator data'.
Why is my Bizerba SC II 100 printer not printing?
If your Bizerba Scales printer won't print, it might be because the print bar is open. Make sure to close the print bar correctly.
How to fix Bizerba SC II 100 display if it does not illuminate?
If the display of your Bizerba Scales does not illuminate, the issue might be due to a lack of supply voltage or incorrect display settings. First, ensure the power cable is properly connected and the mains switch is turned on. If the display remains dark, reset the display settings by confirming the key sequence: +.
Details the different danger levels (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Highlights critical operating conditions like temperature, humidity, installation surface, and power supply.
Identifies potential hazards related to the system, such as supply voltage and energized components.
Specifies that only trained personnel should operate the equipment and emphasizes understanding safety instructions.
Procedures for installing and assembling the device, including leveling.
Step-by-step guide to turning the scale on, including initial display and keyboard check.
Procedures for canceling articles before completing a transaction.
Comprehensive guide to using the tare function, including known and unknown tare values.
How to use cash register functions like pay-in/pay-out and cashier operations.
A table detailing common faults, their causes, and methods for elimination.
A list of text messages, their potential causes, and recommended remedies.
General instructions for cleaning the device and its printer components.
To Next Page
General
