What does 'Simultaneous evaluation on a number of scales is not permitted ! ! !' mean on Bizerba Scales?
If your Bizerba Scales display 'Simultaneous evaluation on a number of scales is not permitted ! ! !' for reports, it means the same cash register (POS) reports are being evaluated on a number of scales. Start the report on one device only.
What does 'Attention!! Scales switched off, please switch on!' mean on Bizerba Scales?
If your Bizerba Scales display 'Attention!! Scales switched off, please switch on!', it indicates that the scales are not activated. Switch on all scales and ensure the connection cable is properly inserted and checked.
What does 'Invalid fixed weight' mean on Bizerba SC II?
If your Bizerba Scales display 'Invalid fixed weight' during sales, it means that fixed weight PLUs cannot be used in the price labeling mode. Check the PLU data for the called PLU in PLU maintenance.
What does 'Zero setting error' mean on Bizerba Scales?
If your Bizerba Scales display 'Zero setting error' during sales, it means there is an error in the automatic zero point control, and the scale is above the country-specific permissible automatic zero setting range. Clean the load plate, position it correctly, and remove any objects. If the problem persists, switch the scale off and on.
What to do if Bizerba SC II display 'Error accessing the cash drawer'?
If your Bizerba Scales display 'Error accessing the cash drawer', and the cash drawer does not open, with the read-back contact not detected, check the connector for the SC II cash drawer.
What does 'Error in encoding' mean on Bizerba Scales?
If your Bizerba Scales display 'Error in encoding' when printing barcodes, check in 'Data maintenance' in the 'Barcode data' menu to ensure that the settings for the applied barcode are correct.
What to do if Bizerba Scales display 'Wrong password'?
If your Bizerba Scales display 'Wrong password' during operator log on/log off, the password used is incorrect. Enter the correct password. The password can be read out in 'Data maintenance' / 'Operator data' under the relevant operator number.
What does 'Incorrect range type, delete range' mean on Bizerba Scales?
If your Bizerba Scales display 'Incorrect range type, delete range' when defining ranges/sets of PLUs, it means the applied number has already been assigned by a range or PLU set. Select a free number.
What does 'Incorrect price group!' mean on Bizerba SC II Scales?
If your Bizerba Scales display 'Incorrect price group!', it means a second price group is being used within a ticket that has been opened with a defined price group, which is not allowed. Another price group cannot be selected within a ticket. Conclude the ticket and process a new ticket with the corresponding price group.
General| Display | LCD |
|---|---|
| Readability | 1 g / 2 g / 5 g |
| Material | Stainless steel |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Operating Temperature | -10°C to +40°C |
| Connectivity | Ethernet, RS232 |
| Application | Retail, industrial |
| Platform Size | 300 x 400 mm / 400 x 500 mm |
Instructions are integral part of device, must be kept accessible.
Device operated by trained personnel familiar with instructions.
Various symbols used in instructions with their meanings.
Source of danger with high risk of imminent danger to persons!
Source of danger with medium risk of possible danger to persons!
Source of danger with low risk of possible danger to persons!
SC II available with linerless or label printer; SC II 7'' with TFT display.
Bizerba offers a wide range of accessories for the device.
High-quality device for convenient counter sales, use only as intended.
Example of an identification plate.
Detailed explanation of each inscription on the scale's identification plate.
Information related to scale verification requirements specific to Germany.
Software ID and update logbook checked during verification by approval officer.
Lists EMC directives and standards relevant to the device.
Lists low voltage directive and safety standards for IT equipment.
Requirements for power supply installation and connection to Bizerba devices.
Measures for mains power supply interference suppression.
Identifies hazards like wrong supply voltage and energized electronics when switched off.
How to transport and store the device in its original packaging.
Information on putting the device into operation and initial setup.
Steps for placing the scale out of operation for a long period.
How to adjust display settings like brightness and contrast.
Steps for unpacking and assembling the device.
How to level the scale using foot screws and a spirit level.
Procedure for checking the power supply connection.
Location of the power switch for SC II 100 and SC II 800 models.
Example of the scale display showing weight, unit price, selling price, and icons.
Explanation of symbols and their meanings in the display.
Details on transparent modules and insert-foils for membrane keyboards.
Instructions for opening and closing the printer lid and side cover.
What happens when the ticket roll is empty and how paper is rejected.
Diagrams and labels for feeding label paper in the SC II 800.
Diagrams and labels for feeding ticket paper in the SC II 800.
Step-by-step guide to powering on the scale.
Information about automatic keyboard check and error messages.
How to cancel a mistakenly called function and return to the initial display.
How to erase individual characters during value entry.
How to switch on the Bakery device (SC II 100 K/B).
How to operate the SC II 100 K/B with weight values.
Procedures for direct PLU access via PLU keys or second keyboard level.
Steps for indirect PLU call-up using configuration and confirmation.
How to call up a PLU and register it using an operator key.
How to input or overwrite the unit price after a PLU call-up.
How to tare unknown values (empties) and applicable rules.
Procedure for manually entering traceability numbers for origin data.
How manual articles can be multiplied in self-service mode.
Explanation of graduated price and 'No Charge' pricing for items.
How to enforce mandatory piece number entry for each PLU.
Configuration and operation for 'Manual-weighed' PLU type.
Table listing common faults, their causes, and elimination steps.
Table of text messages, causes, and remedies.
Cleaning instructions must be observed during installation, operation and maintenance.
Safety warnings and instructions for cleaning the device.
How to clean the thermal strip using specific Bizerba products.
How to clean the label printer from glue residue.
Procedure for testing the accuracy of the weight display.
Diagrams showing the dimensions of SC II 800, SC II 100, and SC II 200.
Requirements for electrical power supply compliance.
To Next Page
