BK Precision 2190D - Page 111

97
7. Press the “Save” option button.
To recall waveforms, follow the steps below:
1. Press the “SAVE/RECALL” button to enter “SAVE/RECALL”
display menu.
2. Press the “Type” option button to select “Waveforms”.
3. Press the “Save to” option button to select “Device”.
4. Press the “Waveform” option button or turn the
“Universal” knob to select “No.1”.
5. Press the “Recall” option button.
Save Waveforms to USB Flash Drive
Table 3.47 – Save Waveform to USB Flash Menu
Option
Setup
Description
Type
Waveforms
Menu for the Storage/Recall
waveforms.
Save to
File
Select save location to USB flash
drive.
Save
Select to save to USB.
Figure 3.51– Save Waveform Screen (To Flash Drive)