www.bodor.com/service@bodor
.com
Instruction is essential to the safe use and easy maintenance of the equipment. This manual
arrives with the machine to customers albeit the machine is resold. The manual should be
changed in time once it is lost, broken, or illegible.
The continuous safe and effective use of the machine should be ensured and no
modifications to the machine without the approval of the manufacturer are allowed. Jinan
Bodor CNC Machine Co., Ltd. (hereinafter referred to as Bodor) is not responsible for any
faults resulting from the modifications above, and solutions to these faults will not be
included in the supporting services by the manufacturer or the product warranty. Please
inform Bodor in writing if there is any problem with the machine. We will evaluate the
problem and provide the necessary information when the machine service is valid. Problems
caused by improper use or non-compliance with Bodor instructions are not covered by the
warranty.
Bodor has checked the contents of the instructions to ensure that they are consistent with the
products described. The information contained in the manual will be reviewed regularly and
any necessary modifications will be included in the next edition. It is appreciated that you
have any suggestions for improvement.
Bodor reserves the right to improve and upgrade the products described in the manual.
Therefore, the technical parameters of the machine and the technical documents including
the manual may be adjusted accordingly without notice.
To Next Page
Loading...
