Bodor i5 Series - Page 4

www.bodor.com/service@bodor
.com
3
Bodor reserves all rights to the instructions. No part of the instructions
may be reproduced in any form without Bodor's written permission. Exceptions must be
explicitly approved by Bodor. Those who do not comply with the regulations are obliged to
compensate for the damage and take possible legal consequences.
Please do not hesitate to consult us if you have any questions or better advice by visiting our
website: www.bodor.com, or calling the 24-hour telephone: +86-531-88690051.
Other documents provided and used together with the manual are shown in Table 1-1.
Table 1-1 Reference documents list
No.
Document name
No.
Document name
1
Operating system manual
7
Electrical schematic diagram
2
On site operation instruction
8
Cutting gas path schematic
diagram
3
Guide for use of auto focus
laser cutting head
9
Schematic diagram of water
pipeline
4
Site layout
10
Pneumatic schematic diagram
5
Foundation map
11
Lubrication schematic
6
Hoisting diagram
12
Statement: If the user permits our installation and debugging, it means that the user
agrees with the shipping list without any objections.