www.bodor.com/service@bodor
.com
1) Any operation other than those regulated herein shall be considered as non-compliant use; any losses caused thereby,
especially property damage, personal injury and production losses, shall be fully borne by the user.
2) Subject to the risk of laser-bounce during the laser cutting process, there should be no flammable and explosive products
such as gasoline and styrofoam within 2 meters around the laser cutting machine to prevent fires, explosions and other
disasters. Any losses caused thereby, especially property damage, personal injury and production losses, shall be fully
borne by the user.
3) The protective devices and functions of the equipment itself must not be removed or discarded by the customer without
permission. Any losses caused by the failure to observe this requirement, especially property damage, personal injury,
production losses, shall be fully borne by the user.
4) The losses incurred by use of outsourcing parts or improper installation and replacement of spare parts or accessories
authorized by Bodor are not within the scope of Bodor Laser’s liability.
To Next Page
Loading...
