www.bodor.com/service@bodor
.com
The bed is welded with high-strength carbon steel pipe, which has high rigidity, stability and impact resistance.
The machine guide rail mounting surface, motor base mounting surface, beam mounting surface and other dimensions
are clamped and processed at one time, which improves the processing accuracy and ensures high cutting accuracy.
1.2.2 Crossbeam Components
The motion unit is based on the beam assembly with high stability. The cross beam is made by extruding the overall casting
of reinforced aluminum alloy through heat treatment, and subject to heat treatment and other technologies, which can ensure
the strength requirement. At the same time, the beam adopts lightweight design to improve the cutting speed. The beam is
mounted with high-precision linear guide rail and gear rack transmission mechanism, so that the cutting head can move
back and forth in the Y direction. Switches and buffer blocks are set on both ends of the stroke to achieve double protection
of action.
To Next Page
Loading...
