operation en
105
7.3 Opening and closing the
lid
1. To open the lid, turn the cover for
the outer lid anticlockwise towards
.
2. To close the lid, turn the cover for
the outer lid clockwise towards
.
a When the lid is closed, the sym-
bols and line up.
3. Open or close the lid completely.
7.4 Setting speed
Requirements
¡ The required tool is selected and
inserted.
→"Tools and accessories",
Page99
¡
is selected in the parameter bar.
▶ Note:The display shows the pos-
sible speeds for each tool.
To select the required speed,
move your finger along the slider.
Notes
¡ The drive runs non-stop in con-
tinuous operation. If you reduce
the speed, the drive runs more
slowly.
¡ In interval operation drive
phases alternate with pauses. If
you reduce the speed, the
pauses become longer.
The table shows the speed per
tool.
Tool Interval
operation
Continu-
ous opera-
tion
1-4 5-6
- 1-7
1-4 5-18
- 1 - 9
Tips
¡ You can change the speed at any
time.
¡ If you select levels 4 to 6 with the
stirrer, food is mixed faster so that
it is heated more quickly and
evenly.
7.5 Using turbo mode
Turbo mode is available for the uni-
versal knife. The universal knife will
rotate at maximum speed for max.
60seconds. You can use turbo
mode to chop or purée food faster.
Requirements
¡ The universal knife has been inser-
ted. →Page100
¡ Operation has stopped.
▶ Press and hold down "Turbo".
a The display shows the duration.
Tip:You can repeat turbo mode if
necessary.
7.6 Setting the temperature
1. Press
.
a The display shows the temperature
scale divided into temperature
ranges.
2. Press the required temperature
range.