Bosch Cookit - Removing the Tool Holder

Cleaning and servicing en
121
3. Remove the inner lid.
4. Turn the cover for the outer lid anti-
clockwise towards ⁠.
a The symbols and line up.
5. Remove the cover for the outer lid.
6. Flap up the outer lid with seal.
7. Remove the outer lid with seal
from the lid holder ⁠.
20.4 Removing the tool
holder
WARNING
Risk of burns!
The casing, pot, tools and metal
components heat up when the appli-
ance is used.
▶ Only remove tools using the spat-
ula.
▶ Only take hold of the pot and lid
by the handles.
▶ Never take hold of the pot by its
metal surfaces.
▶ Never take hold of the tool holder
before it has completely cooled
down.
▶ Never clean or transport the main
unit if it is still hot.
Requirements
¡ The lid has been removed.
→Page120
¡ The tool has been removed.
→Page102
1. Take the pot out of the main unit.
2. Turn the pot on its side.
3. Turn the threaded ring with wings
as far as it will go.
a The symbols and line up.