Bosch Cookit - Basic Settings

en Basic settings
118
19 Basic settings
You can configure the basic settings
for your appliance to meet your
needs.
19.1 Changing the basic set-
tings
You can configure the appliance to
meet your needs.
1. Press
in the main menu.
a The display shows the list of basic
settings.
2. Select the settings you require.
a The settings will be automatically
saved.
3. To exit the basic settings, press
⁠.
19.2 Overview of the basic settings
You can find an overview of the basic settings here.
Setting Selection Description
Home Connect Selection depends on
the network status and
whether the appliance is
connected to HomeCon-
nect.
The display shows net-
work information:
¡ IP
¡ SSID
¡ MAC address
¡ Serial number
Set up Home Connect.
→"HomeConnect ",
Page114
Select settings for Home
Connect.
→"Overview of the
HomeConnect settings",
Page116
Standby after 5mins - 1hr
15mins
1
Set the duration after
which the appliance
automatically switches to
standby mode if there is
no action on the display
or if the appliance is run-
ning.
Display brightness 10% - 100%
50%
1
Set the display bright-
ness in 10% steps.
Volume off
1: quiet
1
2: medium
3: loud
Set the volume of the
tones.
Key tones on
1
off
Set the key tones.
1
Factory setting