46 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
Virtual audio inputs/outputs (Dante/AES67)
Valid for audio channels 09 up to 16.
See also
Optional: Install Dante Controller, page 27
.
– As soon a virtual audio input or output (Dante/AES67) 09‑16 is mapped, it can be
configured to route encrypted analog audio to or from the PRAESENSA system.
– To do so:
1. Select and click the + of the Virtual audio input/output (Dante/AES67) category row:
– The system controller audio channels (*09) up to (*16) become visible.
2. Select input or output from the Audio dropdown list:
– If input (or output) is selected, it cannot be used as output (or input) anymore.
3. Enable (checkmark) or disable the system controller (*nn) checkbox.
– This makes the audio channel (un)available to be used in the PRAESENSA system.
4. Repeat the previous steps to connect / disconnect each of the encrypted audio channels.
5. Click the Submit button to store the settings:
– Notice that you always have to Save the configuration. See
Save configuration, page
102
Unencrypted virtual audio inputs (Dante/AES67)
Valid for unencrypted audio channels 17 up to 128.
See also
Optional: Install Dante Controller, page 27
.
– As soon a Unencrypted virtual audio input (Dante/AES67) 17-128 is mapped, it can be
configured to route unencrypted analog audio to the PRAESENSA system.
– To do so:
1. Select and click the + of the Unencrypted virtual audio inputs (Dante/AES67) category
row:
– The system controller unencrypted audio input channels (*17) up to (*128) become
visible.
2. Enable (checkmark) or disable the system controller (*nn-*nnn) checkbox.
– This makes the audio input channel (un)available to be used in the PRAESENSA
system.
3. Repeat the previous steps to connect / disconnect each of the unencrypted audio input
channels.
4. Click the Submit button to store the settings:
– Notice that you always have to Save the configuration. See
Save configuration, page
102
To Next Page
Loading...
