Bosch PRAESENSA PRA-CSLD - Page 63

PRAESENSA Configure the system | en 63
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
Item Value Description Additional function
Make
announcement
Selection See Action definitions, page
84
Actions (1-5): Selects the
number of actions for this
button if it is a Make
announcement action.
Start phased
announcement
Selection See Action definitions, page
84
Actions (1-5): Selects the
number of actions for this
button if it is a Start action.
Stop phased
announcement
Selection See Action definitions, page
84
Actions (1-5): Selects the
number of actions for this
button if it is a Stop action.
Silence zone(s) Selection See Action definitions, page
84
N.a.
Acknowledge
and/or reset
Selection See Action definitions, page
84
N.a.
Indicator test Selection See Action definitions, page
84
N.a.
Switch control
output
Selection See Action definitions, page
84
N.a.
Local brightness
control
Selection See Action definitions, page
84
N.a.
Submit Button Click the Submit button to
store the settings. Notice that
you always have to Save the
configuration. See Save
configuration, page 102
N.a.
Recorded messages
Here you could add (or rename) a free chosen name for the Recorded messages tile used by
the selected call station. It becomes a label as shown in the call station display Recorded
messages tile.
To do so:
1. Click the + Recorded messages category.
2. Enter (or rename) a name for the (new) recorded message tile in the (empty) text box:
– It may consist of up to 16 characters, maximum.
3. Enable the checkbox and click the Add button:
– The (new) recorded message name is added to the Recorded messages category.
– See also Call definitions, page 81 .
4. To delete a recorded message name, click the Delete button and confirm with Yes.