64 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
Alert messages
Here you could add (or rename) a free chosen name for the Alert messages tile used by the
selected call station. It becomes a label as shown in the call station display Alert messages
tile.
To do so:
1. See the Recorded messages chapter as previously described. The naming procedure is
similar.
Call station top‑ and bottom-side indicators
The top-side indicators and LCD indicate correct functionality and faults.
To put the call station in identification mode (LEDs blinking), see
System composition, page
40
.
PRA-CSLD PRA-CSLW
Power on
Device in identification
mode
Green
Green blinking
System fault present Yellow
PRA-CSLD
Status business call
Microphone active
Chime/message active
Status emergency call
Microphone active
Alarm tone/message
active
Green
Green blinking
Red
Red blinking
4.3" full‑color capacitive
touch screen
LCD
PRA-CSLW
Status business call
Microphone active
Chime/message active
Status emergency call
Green
Green blinking
Identification mode /
Indicator test
All LED's blink